The PocketPAD 4 is a low-cost, light-weight device server connecting four asynchronous serial devices to Ethernet networks. The PocketPAD can be used as a stand-alone desktop or mounted on a DIN-rail.
This product range includes the following hardware configurations:
- Four RS232 serial to 10/100 Base-T Ethernet
- Three RS232 and one RS232/RS422/RS485 serial to 10/100 Base-T Ethernet
Device network connectivity via UDP/IP, TCP/IP. Device management via Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II), Built-in Serial configuration interface, Windows configuration Utility. Flash memory for convenient software updates. Low cost and Compact size. Lightweight. Multiple Network connections allowed to the same Serial data stream. DIN Rail mounting kit available.
Software Specification: Network Protocols: TCP/IP, UDP/IP, BootP/DHCP, TFTP, ICMP, ARP, Telnet, HTTP, SNMP (v1 & v2) Serial Protocols: Raw, TC500 (Burroughs Poll Select) Parity: None, Even, Odd, Mark, Space Flow Control: Hardware (RTS/CTS), Software (XON, XOFF), None Data Size: 5, 6, 7, 8 Stop bits: 1, 2 Data Throughput: Up to 230400 Baud Web Server (Configuration) Debug and diagnostic tools Password Protection Firmware upgrade over serial Kermit Multiple concurrent network connections (25 max) Hardware Specification: ARM9 processor 8MB RAM, 4MB Flash 10/100 Base-T autodetect Ethernet interface Four RS232 Serial interfaces One Hardware selectable RS422/RS485 Serial interface on PocketPAD 4 RS-232/422/485 LED indication for Ethernet, Serial & system status Physical Specifications: Ethernet (10/100 Base-T): RJ45 connector Serial port: DB9 male connectors Enclosure: Opaque Green Polycarbonate Dimensions: 120mm x 90mm x 40mm Weight: 185 grams, 194 grams (RS-232/422/485 version) PSU Weight: 150 grams Temperature Range Operating: 0 degrees Celsius to 60 degrees Celsius Temperature Range Storage: -10 degrees Celsius to 70 degrees Celsius Electrical Specification: Power requirement: 2W (5V DC) Consumption: 250mA A light weight switchmode power supply is available. Interchangeable connector options are available. Wall mount options include US, UK, EU, AU connectors. A figure 8 connector is also avilable for a desktop solution.
Removable DIN-rail Mounting Kit
Mount your PocketPAD on a DIN Rail.
PocketPAD | Ports | Flash | RAM | Features | Addons | PocketPAD 1
10/100 Base-T
1x RS232
PROD0100 | 1x DB9
1x RJ45 | 4 MB | 8 MB | TCP/IP, UDP/IP, SNMP, FTP, HTTP, Telnet, TFTP, BootP/DHCP | DIN Rail Kit
5V DC PSU
| PocketPAD 1 RS-232/422/485
10/100 Base-T
1x RS232/RS422/RS485
PROD0101 | 1x DB9
1x RJ45 | 4 MB | 8 MB | TCP/IP, UDP/IP, SNMP, FTP, HTTP, Telnet, TFTP, BootP/DHCP | DIN Rail Kit
5V DC PSU
| PocketPAD 2
10/100 Base-T
2x RS232
PROD0105 | 2x DB9
1x RJ45 | 4 MB | 8 MB | TCP/IP, UDP/IP, SNMP, FTP, HTTP, Telnet, TFTP, BootP/DHCP | DIN Rail Kit
5V DC PSU
| PocketPAD 2 RS-232/422/485
10/100 Base-T
1x RS232
1x RS232/RS422/RS485
PROD0106 | 2x DB9
1x RJ45 | 4 MB | 8 MB | TCP/IP, UDP/IP, SNMP, FTP, HTTP, Telnet, TFTP, BootP/DHCP | DIN Rail Kit
5V DC PSU
| PocketPAD 4
10/100 Base-T
4x RS232
PROD0107 | 4x DB9
1x RJ45 | 4 MB | 8 MB | TCP/IP, UDP/IP, SNMP, FTP, HTTP, Telnet, TFTP, BootP/DHCP | DIN Rail Kit
5V DC PSU
| PocketPAD 4 RS-232/422/485
10/100 Base-T
3x RS232
1x RS232/RS422/RS485
PROD0108 | 4x DB9
1x RJ45 | 4 MB | 8 MB | TCP/IP, UDP/IP, SNMP, FTP, HTTP, Telnet, TFTP, BootP/DHCP | DIN Rail Kit
5V DC PSU
|
Hardware Options | Type | Features | Power Adapter
(Euro)
PROD0908 | 
| 5V DC Power Adapter with two prong Euro Plug | Power Adapter
(USA)
PROD0909 | | 5V DC Power Adapter with US Plug | Power Adapter
(Australian)
PROD0910 | 
| 5V DC Power Adapter with two prong Australian Plug | Power Adapter
(UK)
PROD0911 | 
| 5V DC Power Adapter with three prong UK Plug | Power Adapter
(desktop)
PROD0912 | 
| 5V DC Power Adapter with Figure 8 Desktop Plug | DIN Rail Bracket
PROD0111 | | Mounting Kit for DIN rail |
|
